To Next PageTo Next Page
Need help?Do you have a question about the DYNACO Dynakit ST35 and is the answer not in the manual?
General| Type | Stereo Tube Amplifier |
|---|---|
| Input Impedance | 470k ohms |
| Weight | 18 lbs |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | Less than 1% |
| Output Impedance | 4, 8, and 16 ohms |
| Input Sensitivity | 0.5V |
| Tube Complement | 2 x 12AX7 |
| Power Output | 17.5 watts per channel RMS |
Outlines the four essential steps for creating a secure solder joint.
Explains how to bend wire ends for a secure mechanical connection.
Instructions for installing circuit boards and input/tube sockets onto the chassis.
Guidance for securing the power and output transformers and filter capacitor.
Connects various leads from the main power transformer to the chassis and tube sockets.
Details the connections for the left channel output transformer to the circuit board.
Completes the wiring for the left channel output transformer to the terminal strip.
Connects the right channel output transformer leads to the circuit board and terminal strip.
Connects resistors and associated wiring to the filter capacitor.
Connects wires from filter capacitor chassis lugs to terminal strips.
Details connections for rectifier diodes, input sockets, and various circuit board eyelets.
Specific wiring steps for the left channel circuit board.
Guides for wiring optional power transformers for different voltage inputs.
Details loudspeaker impedance matching and correct phasing for stereo.
How to connect headphones to the amplifier.
Method for adding a central loudspeaker to a stereo system.
Addresses problems related to tube filament glow and lighting.
Diagnosing absence of sound, hum, or noise in the amplifier.
Specific steps to diagnose and resolve hum and noise problems.
Explains how to identify faulty tubes or circuitry causing abnormal filament glow.
Using the voltage chart for diagnosis and checking for short circuits.
Details the warranty period for parts and tubes, and return procedures.
Information on paid service for assembled kits and warranty exclusions.
Guidelines for securely packing and shipping the amplifier for factory service.
Provides voltage readings for various points in the left channel circuit.
