Need help?Do you have a question about the DYNACO PAT-5 and is the answer not in the manual?
General| Output Impedance | 600 ohms |
|---|---|
| Power Supply | 120V AC, 60 Hz |
| Maximum Output Voltage | 10V |
| Type | Preamplifier |
| Total Harmonic Distortion | 0.05% |
| Input Sensitivity | 2.5 mV (MM), 150 mV (line) |
| Gain | 20 dB (line) |
Details critical safety precautions to prevent injury during assembly and operation.
Explains mounting voltage regulators with their respective heatsinks.
Provides a checklist to verify correct component installation before proceeding.
Covers final steps for connecting mains AC power to the upgraded circuit board.
Outlines testing power supply voltages before full re-assembly.
Highlights crucial safety measures for testing with AC power.
To Next Page
