Need help?Do you have a question about the Dynacord MP7 and is the answer not in the manual?
Covers essential safety guidelines for operation, cleaning, and maintenance of the appliance.
Emphasizes servicing by qualified personnel and specific safety protocols during maintenance.
Welcome message, product overview, and instructions for unpacking and warranty registration.
Guidance on proper placement, ventilation, and initial connection for optimal operation.
Details on balanced XLR microphone inputs and balanced/unbalanced line inputs.
Functionality and benefits of the low-cut filter for reducing low-frequency noise.
Setting input sensitivity with GAIN and shaping tone with the 3-band EQ section.
PAN, FX/MUTE, PFL, and Signal/Peak indicators for channel management.
Using the VOLUME fader and the TALK function for announcements.
Details on CD/MD and Phono inputs, and the input selection switch.
Setting input sensitivity for stereo channels to match signal levels.
Tone controls, balance, and transition assignment features for stereo channels.
Signal/Peak indicators and the channel fader for stereo output control.
Description of FX units, program presets, display, and selection controls.
Powers the internal FX units on or off.
Monitoring FX unit clipping and adjusting the effect signal percentage in the mix.
LEDs for transition assignment and the fader for cross-fading channels.
Volume, mix fader, and output jack for headphone monitoring.
XLR socket for connecting an optional gooseneck light.
Details on Master B output, stereo/mono modes, and pre/post control.
Description of dedicated outputs for monitors, subwoofers, and recording.
Input for feeding the internal power amplifier from an external source.
LED indicators for Power, Limit, and Protect status of the internal power amplifiers.
Integrated equalizer for shaping the overall sound of the stereo output.
Controls for master display modes, EQ activation, and output balance.
Main stereo fader for adjusting overall volume and power amplifier output.
SPEAKON speaker outputs and the main power switch/fuse.
Facility for connecting the chassis ground of a turntable to prevent noise.
Advice on cable quality, speaker cables, and balanced vs. unbalanced signal wiring.
Equipment list and instructions for speaker placement and connecting loudspeakers.
Diagram for connecting sources and the recommended power-on sequence.
Key operational tips, clipping prevention, and examples for system extension.
Detailed specs for output power, frequency range, and distortion levels.
Specifications for input levels, noise, impedance, and channel separation.
Details on EQ bands, shelving, peaking, and master EQ specifications.
Physical dimensions, weight, power requirements, and optional accessories.
Diagrams illustrating the signal path through mono and stereo input channels.
Diagrams showing signal routing to master outputs, effects, and the power amplifier.
Detailed drawings showing the physical dimensions of the MP7 unit in millimeters.
Details on the warranty period, coverage, and conditions for claims.
Covers essential safety guidelines for operation, cleaning, and maintenance of the appliance.
Emphasizes servicing by qualified personnel and specific safety protocols during maintenance.
Welcome message, product overview, and instructions for unpacking and warranty registration.
Guidance on proper placement, ventilation, and initial connection for optimal operation.
Details on balanced XLR microphone inputs and balanced/unbalanced line inputs.
Functionality and benefits of the low-cut filter for reducing low-frequency noise.
Setting input sensitivity with GAIN and shaping tone with the 3-band EQ section.
PAN, FX/MUTE, PFL, and Signal/Peak indicators for channel management.
Using the VOLUME fader and the TALK function for announcements.
Details on CD/MD and Phono inputs, and the input selection switch.
Setting input sensitivity for stereo channels to match signal levels.
Tone controls, balance, and transition assignment features for stereo channels.
Signal/Peak indicators and the channel fader for stereo output control.
Description of FX units, program presets, display, and selection controls.
Powers the internal FX units on or off.
Monitoring FX unit clipping and adjusting the effect signal percentage in the mix.
LEDs for transition assignment and the fader for cross-fading channels.
Volume, mix fader, and output jack for headphone monitoring.
XLR socket for connecting an optional gooseneck light.
Details on Master B output, stereo/mono modes, and pre/post control.
Description of dedicated outputs for monitors, subwoofers, and recording.
Input for feeding the internal power amplifier from an external source.
LED indicators for Power, Limit, and Protect status of the internal power amplifiers.
Integrated equalizer for shaping the overall sound of the stereo output.
Controls for master display modes, EQ activation, and output balance.
Main stereo fader for adjusting overall volume and power amplifier output.
SPEAKON speaker outputs and the main power switch/fuse.
Facility for connecting the chassis ground of a turntable to prevent noise.
Advice on cable quality, speaker cables, and balanced vs. unbalanced signal wiring.
Equipment list and instructions for speaker placement and connecting loudspeakers.
Diagram for connecting sources and the recommended power-on sequence.
Key operational tips, clipping prevention, and examples for system extension.
Detailed specs for output power, frequency range, and distortion levels.
Specifications for input levels, noise, impedance, and channel separation.
Details on EQ bands, shelving, peaking, and master EQ specifications.
Physical dimensions, weight, power requirements, and optional accessories.
Diagrams illustrating the signal path through mono and stereo input channels.
Diagrams showing signal routing to master outputs, effects, and the power amplifier.
Detailed drawings showing the physical dimensions of the MP7 unit in millimeters.
Details on the warranty period, coverage, and conditions for claims.
General| Brand | Dynacord |
|---|---|
| Model | MP7 |
| Category | Music Mixer |
| Language | English |
To Next Page