Need help?Do you have a question about the Dynacord Elan Series and is the answer not in the manual?
Features -131 dBV EIN and -87 dBV A-weighted output noise for professional audio quality.
Provides fader-controlled, active balanced XLR outputs for left, right, main, and monitor signals.
Designed with logical grouping of controls for simple and intuitive operation.
Offers three aux sends and insert jacks on each channel for excellent signal routing capabilities.
Features "B" scale VU meters with integral peak LEDs for easy signal monitoring.
Includes a three-year parts-and-labor warranty for peace of mind.
Mic Input to Master Output (EQ flat): 20-20,000 Hz (+1/-3 dB).
20-20,000 Hz at +4-dBu Output into 600 Ohms: <0.05%.
(-131 dBV, microphone input) with 150-ohm termination.
(-87 dBV residual at master outputs, A-weighted, all faders down).
Two "B"-scale analog VU meters with integral peak LEDs, range -20 dB to +3 dB.
Features ±15-dB low cut/boost at 100 Hz, ±15-dB mid cut/boost sweepable, ±15-dB high cut/boost at 10,000 Hz.
8, 12, 16, or 24 low impedance, balanced, 3-pin XLR type with +48 volts phantom power.
8, 12, 16, or 24 high impedance, unbalanced, 1/4-inch phone jack.
Three inputs, high impedance, unbalanced, 1/4-inch phone jack, nominal +4 dBu.
Balanced low-impedance outputs are 150 ohms. Max output level +24 dBu.
Details height, width, depth, and weight for Élan 8, 12, 16, and 24 models.
Professional stereo consoles ideal for sound reinforcement, featuring logical controls and clear labeling.
3-pin XLR mic inputs, 1/4-inch line inputs with three-band EQ, and insert jacks on each channel.
Active-balanced XLR outputs, headphone amp with level control, and tape record output.
High-quality components, separate PCBs per channel, integral power supply, IEC connector, UL/CSA approved.
Detailed specs including input/output connectors, EQ, PFL, aux sends, and meter types.
Three-year warranty against defects in materials/workmanship, with exclusions and service information.
Features -131 dBV EIN and -87 dBV A-weighted output noise for professional audio quality.
Provides fader-controlled, active balanced XLR outputs for left, right, main, and monitor signals.
Designed with logical grouping of controls for simple and intuitive operation.
Offers three aux sends and insert jacks on each channel for excellent signal routing capabilities.
Features "B" scale VU meters with integral peak LEDs for easy signal monitoring.
Includes a three-year parts-and-labor warranty for peace of mind.
Mic Input to Master Output (EQ flat): 20-20,000 Hz (+1/-3 dB).
20-20,000 Hz at +4-dBu Output into 600 Ohms: <0.05%.
(-131 dBV, microphone input) with 150-ohm termination.
(-87 dBV residual at master outputs, A-weighted, all faders down).
Two "B"-scale analog VU meters with integral peak LEDs, range -20 dB to +3 dB.
Features ±15-dB low cut/boost at 100 Hz, ±15-dB mid cut/boost sweepable, ±15-dB high cut/boost at 10,000 Hz.
8, 12, 16, or 24 low impedance, balanced, 3-pin XLR type with +48 volts phantom power.
8, 12, 16, or 24 high impedance, unbalanced, 1/4-inch phone jack.
Three inputs, high impedance, unbalanced, 1/4-inch phone jack, nominal +4 dBu.
Balanced low-impedance outputs are 150 ohms. Max output level +24 dBu.
Details height, width, depth, and weight for Élan 8, 12, 16, and 24 models.
Professional stereo consoles ideal for sound reinforcement, featuring logical controls and clear labeling.
3-pin XLR mic inputs, 1/4-inch line inputs with three-band EQ, and insert jacks on each channel.
Active-balanced XLR outputs, headphone amp with level control, and tape record output.
High-quality components, separate PCBs per channel, integral power supply, IEC connector, UL/CSA approved.
Detailed specs including input/output connectors, EQ, PFL, aux sends, and meter types.
Three-year warranty against defects in materials/workmanship, with exclusions and service information.
General| EQ Bands per Channel | 3 |
|---|---|
| Phantom Power | Yes |
| Series | Elan |
| EQ | Yes |
| Effects | No |
To Next Page