Need help?Do you have a question about the Dynacord POWERMATE 1000 and is the answer not in the manual?
General| Brand | Dynacord |
|---|---|
| Model | POWERMATE 1000 |
| Category | Music Mixer |
| Language | English |
Essential guidelines to prevent fire, electric shock, and ensure safe operation.
Instructions for servicing to reduce risk of electric shock and ensure safety compliance.
Instructions for unpacking the device and warranty registration.
Guidelines for placing the device and making audio connections.
Details MIC and LINE inputs, and the GAIN control for sensitivity adjustment.
Covers INSERT, LO CUT filter, VOICING filter, and the EQ SECTION for audio processing.
Explains AUX/FX, AUX 3 sends, PAN, PFL, and SIGNAL/PEAK indicators.
Describes the use of the VOLUME channel fader for level adjustment.
Details MIC/LINE inputs, GAIN, TRIM, EQ, AUX/FX, PAN, PFL, and VOLUME for stereo channels.
Covers FX units, presets, UP/DOWN buttons, FX ON switches, PEAK LEDs, and effect returns.
Details the AUX3 SEND output, feedback filter, POST switch, PFL, and volume control.
Covers MONO OUT, PHONES OUT, PHONES LEVEL, STANDBY, and MONO MASTER VOLUME.
Describes STEREO RETURNS, 2TRACK RETURN, and related controls.
Covers MAIN INSERTS, MAIN OUTPUTS, EQ I/O, POWER AMP INPUTS.
Details PHANTOM POWER, status indicators, and 7-band EQ.
Explains MASTER L+R faders, master PFL, and power amplifier specifications.
Describes SPEAKON connectors for speaker connection.
Details the mains power switch and operational indicators.
Guidelines for mains supply, speaker, and LF cables.
Advice on positioning the mixer, amplifiers, and speakers for optimal sound.
Step-by-step guide for adjusting input levels and EQ.
Guidance on setting up the main and monitor mixes, including FX and feedback control.
Examples of connecting external amplifiers and mixing consoles.
Using the internal amp for monitor/side-fill and monaural reinforcement setups.
Demonstrates passive and active stereo 2-way speaker setups.
To Next Page