DYNAMIC DIAMOND TOOLING Beast - 2 Peration of Machine

4.2 Operation of Machine
4.2.1 Dust Shroud Installation
How to install the 12” shroud
 Secure 3 hose to dust port inlet on shroud
 lace shroud over grinding head casing
Rubber Dust Shroud Installation
How to install the 12” rubber dust shroud
 Secure rubber shroud holes onto shroud pins on shroud
 ull the rubber dust shroud over the grinding head casing and secure onto shroud pins
on opposite side of shroud
Page 11
Dynamic Diamond Tooling
DDG 1220 User Manual