2. Safety Information
2.1Legend
Failure to comply may result in personal injury or damage to equipment
CAUTION
Failure to comply with an operating procedure, technique, etc., may result in damage to
equipment if not carefully followed.
Failure to comply with an operating procedure, technique, etc., that may result in
personal injury and/or damage to equipment if not carefully followed.
Dust Forms when grinding and can cause injuries if inhaled. Use an approved breathing
mask. Always ensure good ventilation.
Approved protective helmet, approved hearing protection, protective goggles or a visor,
protective dust mask or respirator.
2.2 Safety Precautions
The DDG 122 must be used in accordance with the safet information provided Failure to
compl with this manual ma cause personal injur andor damage to the machine
ever operate the machine unless it is in the upright position
nsure that there is no debris present in the work area
Check the work area surface for screws or other hard objects that ma be in the concrete
floor Such objects must be removed prior to using the machine
Modifications addons and changes to the machine must not be made This will void the
manufacturers warrant and can potentiall cause injur to personnel andor damage to the
machine
All safet devices must be in operation and adherence to safet regulations must be
followed at all times
Spare parts must compl with the technical reuirements as specified b the manufacturer
Intervals for recurring checks and inspections as specified in this owners manual must be
complied with
lease read this entire owners manual Failure to compl with safet
information ma result in serious injur or damage to the machine
To Next Page
Loading...