Dynamite FUSE DYN4955 User Manual

EN
3
Introduction
Thank you for choosing the Dynamite
®
brand. We know that you, the customer, are the reason we are
in business. Your satisfaction is our number one priority. With this in mind, we have produced this
product to be of the highest quality, performance and reliability, and at a “value packed” price. We hope
it provides you with hours of enjoyment in your next RC project.
Specications
Type Sensorless
Constant/Peak 130A/760A
Resistance 0.0004 Ohm
Function Forward/Brake-Forward/Brake Reverse (for Rock Crawler: Forward/Reverse)
Vehicle Type 1/8 Buggy or Truggy, 1/10 4WD Short Course
Operation Proportional forward, proportional reverse with braking delay
Input Voltage 7.4V–14.8V
Motor Type 2S Li-Po up to 6000Kv; 3S Li-Po up to 4000Kv; 4S Li-Po up to 3000Kv
BEC Output 6V/3A
Overload Protection Thermal
Dimensions (LxWxH) 53.5mm x 36mm x 36mm
Weight 79 g
Features
• CompatiblewithNi-Cd/Ni-MHandLi-Po/
Li-Ion batteries.
• Pre-wiredwithbullet-stylemotorconnectors
and a universal receiver plug that fits most
popular radio systems.
• Designedtooperatewithsensorless
brushless motors.
• Basicsetupandprogrammingthroughthe
SET button
• Enhancedprogrammingisavailablewith
optional Digital Program Box (DYN3748)
• Designedforon-roadandoff-roaduse
• High-precisionspeedandpowercontrol
• High-power,built-inBECsystemforstable
receiver and servo power supply
• Forwardandreversefunction
• AdjustablesettingsintheESCfornecontrol
of vehicle operation
• Multipleprotectionsystems:batterylow
voltage cut-off, overheating, radio signal loss,
stuck or locked motor or driveline

Dynamite FUSE DYN4955 Specifications

General

Brand	Dynamite
Model	FUSE DYN4955
Category	Controller
Language	English