Need help?Do you have a question about the Dynamite FUSE DYN4955 and is the answer not in the manual?
General| Brand | Dynamite |
|---|---|
| Model | FUSE DYN4955 |
| Category | Controller |
| Language | English |
Explains the meaning of safety terms like NOTICE, CAUTION, and WARNING used in the manual.
Illustrates the wiring connections between the ESC, motor, receiver, and servo.
Details ESC LED status and audible warning tones for operational feedback.
Step-by-step guide to calibrate the ESC to your transmitter inputs.
Guide on how to program ESC settings using the SET button or Program Box.
Details the differences between Forward/Brake and Forward/Reverse/Brake modes.
Adjusts the automatic brake applied when the throttle returns to neutral.
Mode for Rock Crawlers only, eliminating brake delay between forward and reverse.
Function to prevent battery over-discharge by monitoring voltage.
Sets the initial throttle punch when the car accelerates.
Adjusts the maximum braking force, affecting braking strength.
Provides solutions for common issues like no motor function, wrong direction, or motor stopping.
Addresses issues with steering, vehicle speed, and transmitter range.
Details what the product warranty covers and what is excluded.
Outlines the limitations of Horizon Hobby's liability regarding product use.
Instructions for submitting the product for inspection or service.
Conditions and requirements for warranty consideration, including proof of purchase.
Provides contact details for warranty and service support by region.
Lists contact information for ordering replacement parts.
States conformity with EU specifications and EMC Directive requirements.
Guidance for users in the EU on proper disposal of waste electrical equipment.
To Next Page
