EN
6
Programmable
Items
1 2 3 4
1 Running Mode Forward with
Brake
Forward/Reverse
with Brake
Forward/Reverse
2 Drag Brake
Force
0% 5% 10% 20%
3 Low Voltage
Cutoff
Threshold
non-portection 2.6V/Cell 2.8/Cell 3.0/Cell
4 Start Mode Level 1 Level 2 Level 3 Level 4
5 Max Brake
Force
25% 50% 75% 100%
6 Max Reverse
Force
25% 50% 75% 100%
7 Initial Brake
Force
= Drag Brake
Force
0% 20% 40%
8 Neutral Range 6% (Narrow) 9% (Normal) 12% (Wide)
9 Timing 0.00º 3.75º 7.50º 11.25º
10 Reserved Item
11 Reserved Item
12 Motor Rotation Counter-
clockwise
Clockwise
13 Lipo Cells Auto Calculate 2 Cells 3 Cells 4 Cells
Programmable Value
Advanced Items
Basic Items
Default Settings
Descriptions
1 Running Mode
Forward Only with Brake
Intended for competition use, this mode allows
only forward and brake controls.
Forward/Reverse with Brake
This mode is the basic all-around mode, allowing
forward, reverse and brake controls. To engage
reverse while moving forward, apply the brake
until the vehicle has come to a complete stop,
release brake, then apply the brake again. While
braking or in reverse, engaging the throttle will
result in the vehicle immediately accelerating
forward.
To Next Page
Loading...