EasyManua.ls Logo

Dynamite FUSE DYN4955 - Programmable Item Descriptions (Continued); Forward;Reverse Mode (Rock Crawler); Low Voltage Cut-off Threshold

Dynamite FUSE DYN4955
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
7
5 6 7 8 9
40% 60% 80% 100%
3.2/Cell 3.4/Cell
Level 5 Level 6 Level 7 Level 8 Level 9
disable
15.00º 18.75º 22.50º 26.25º
5 Cells 6 Cells
Programmable Value
Advanced Items
Basic Items
Default Settings
Forward/Reverse
Intended for Rock Crawler use only. In this mode,
there is no brake, eliminating the delay between
forward to reverse.
NOTICE: Do not use this mode with car types
other than Rock Crawlers as this mode can
overload and/or damage the ESC.
2 Drag Brake Force
Adjusts the amount of brake automatically
applied when the throttle is returned to the neutral
position. This simulates the engine braking effect
of a full-scale vehicle, allowing improved turn-in
and your vehicle’s general response to controls.

Related product manuals