Installation, Operation and Service Manual LKAT
2
Portable
© 2018 DynAmp, LLC Page 30
047312 A
6.3 SPARE PARTS
The following table lists the minimum recommended quantities for spare parts for the LKAT
2
System. As spares are used, replacements should be ordered. Since continuous operation
of high-current measurement systems is often critical, stocking spare parts should be given
high priority.
The LKAT
2
System Measuring Heads require special repair procedures and materials.
However, the heads are very reliable and should require little or no repair over its service
life. Please refer to the nearest authorized DynAmp, LLC service center for information on
repairs.
Disconnect power to the system before servicing.
Table 6.1
Spare Parts List
DESCRIPTION ITEM NO. RECOMMENDED
QUANTITY
2
Screw , LKAT
2
mounting SHCS 1/4-20 X 3” 46028 2 (each)
Measuring Head
**
(1) Each of
* Item number same as original system
** Contact DynAmp, LLC
.
To Next Page
Loading...
Need help?
General
