Dynapac CC 102 - User Manual

Workshop
CC 102/102C/122/122C
Hydr Propulsion Pumps
W-1012-2EN
Valid for pump P/No: 35 84 70
Printed in Sweden 95 11
We reserve the right to change specifications without notice.
Dynapac Heavy Equipment AB
Box 504 • S-371 23 KARLSKRONA • SWEDEN
Telephone +46 455-627 00
Telefax +46 455-627 30
Telex 43041 dynkar s

Summary

Workshop

Safety Regulations

General advice

Make yourself familiar with the equipment and its intended use.

Before starting

Study instructions, check machine, ensure safety devices are secure.

Start

Instructions for starting the machine safely.

Hydraulic equipment

Safety precautions for hydraulic systems.

General Dismantling

General Reassembly

Sealing of the drive shaft

Sealing of the high pressure valve HD

Sealing of the charge pressure valve

Sealing of the control device

Control device HW

Dismantling of the pump

Inspection notes

Pump assembly

Tightening torques

Adjustment instructions Mechanical zero position

Adjustment instructions Hydraulic zero position

Adjustment instructions HP-valves (High pressure)

Adjustment instructions Low pressure valve (Charge pressure)

Dynapac CC 102 Specifications