Dynapac CC 232 - Every 10 Hours of Operation (Daily)

13CC 222/222C - CC 232/232C - CC 322 M222EN5
EVERY 10 HOURS OF OPERATION (Daily)
Brakes - Check
Fig. 14 Control panel
38. Reserve/parking brake knob
40. Forward/reverse lever
38 40
Check operation of the brakes as follows:
Drive the roller slowly forward.
Push the reserve/parking brake knob (38); the warning
lamp on the instrument panel should light and the roller
should stop.
After testing the brakes, set the forward/reverse lever
(40) in neutral.
Pull up the reserve/parking brake knob.
The roller is now ready for operation.
WARNING