Dynapac CC 222 User Manual

Box 504, SE-371 23 Karlskrona, Sweden
Telephone +46 455 30 60 00
Telefax +46 455 30 60 30
DYNAPAC
CC 222/222C • CC 232/232C
CC 322
M222EN5
MAINTENANCE

Dynapac CC 222 Specifications

General

Operating Weight	7250 kg
Engine Power	55.4 kW
Drum Width	1680 mm
Vibration Frequency	51/57 Hz
Centrifugal Force	66/55 kN
Amplitude	0.65/0.30 mm

Summary

Technical Specifications

Weights, Dimensions, and Fluid Volumes

Electrical System and Performance Data

Every 10 Hours of Operation (Daily)

Hydraulic Reservoir - Level Check - Filling

Procedure for checking and filling the hydraulic fluid level.

Fuel Tank - Refueling

Instructions for safely refueling the diesel fuel tank.

Water Tanks - Filling

Guidance on filling the water tanks for the sprinkler system.

Every 50 Hours of Operation (Weekly)

Steering Joint - Lubrication

Greasing procedure for the steering joint.

Steering Cylinder - Lubrication

Greasing procedure for the steering cylinder.

Pivot Cylinder (Optional) - Lubrication

Every 250 Hours of Operation (Monthly)

Hydraulic Fluid Cooler - Checking - Cleaning

Instructions for checking and cleaning the hydraulic fluid cooler.

Air Conditioning (Optional) - Inspection

Every 500 Hours of Operation (Every three months)

Drum - Oil Level Inspection - Filling

Split Drums - Lubrication (CC 232 only)

Pivot Bearing (Optional) - Lubrication

Every 1000 Hours of Operation (Every six months)

Hydraulic Filter - Replacement

Procedure for replacing the hydraulic filter.

Air Filter - Changing

Fresh Air Filter - Replacement

Every 2000 Hours of Operation (Yearly)

Hydraulic Reservoir - Changing the Fluid

Procedure for changing the hydraulic fluid.

Drum - Oil Level

Fuel Tank - Cleaning

Electrical System and Fuses

Fuses

Location and function of fuses in the instrument panel and engine compartment.

Relays