7CC 222/222C - CC 232/232C - CC 322 M222EN5
MAINTENANCE MEASURES
Items in Measure See page Comments
fig. 1
Before starting up
2 Check oil level in the engine See engine manual
13 Check the hydraulic reservoir level 9
3 Refuel 9
5 Fill the water tanks 9
6 Emergency watering 10
6 Nödbevattning 11
7 Inspect the scraper setting/drum 11 Optional
Inspect spring-action scrapers 11
24 Inspect the sprinkler system/tires 12
24 Inspect the scraper setting/tires 12
Test the brakes 13
Every 10 hours of operation (Daily)
Items in Measure See page Comments
fig. 1
10 Grease the steering joints 14
11 Grease the steering cylinder brackets 14
18 Grease the operating cylinder for pivotal steering 14 Optional
1 Inspect/clean the filter element in the air cleaner 15 Replace as required
24 Check the tire pressure (combo) 16
Inspect the air conditioning 16 Optional
Inspect/lubricate the edge cutter 17 Optional
22 Check electrolyte level in battery 17
After the first 50 hours of operation, change all the
oil filters and oil, except the hydraulic fluid.
Every 50 hours of operation (Weekly)
The periodic measures should be performed primarily
after the specified hours of operation. Use the daily,
weekly, etc. time periods only where this is not possible.
Remove all dirt before filling, when checking
oils and fuel, and when lubricating with oil or
grease.
The manufacturer’s instructions noted in the
engine manual also apply.
CAUTION
CAUTION
CAUTION
To Next Page
Loading...
Need help?
General
