Dynapac CC800 - Page 48

Operation
4812160801_D.pdf 2018-12-17
Fig. Instrument panel
20. Vibration switch
20
Check while warming the engine that the warning
lamps for the oil pressure (24) and charging (28) go
out.
The warning lamp (25) should remain on.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
Fig. Control panel
24. Oil pressure lamp
25. Brake lamp
28. Charging lamp
29. Glow lamp
28
29
24
25
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
40