Dynapac CC800 - Maintenance - Lubricants and Symbols

Maintenance - Lubricants and symbols
4812160801_D.pdf2018-12-17
Maintenance - Lubricants and symbols
Fluid volumesFluid volumes
Hydraulic reservoir 12 liters 3,2 galHydraulic reservoir 12 liters 3,2 gal
Engine 5,1 liters 5.4 qtsEngine 5,1 liters 5.4 qts
DrumDrum
- CC800 2,5 liters 2.6 qts- CC800 2,5 liters 2.6 qts
- CC900 3,5 liters 3.7 qts- CC900 3,5 liters 3.7 qts
- CC1000 4,5 liters 4.8 qts- CC1000 4,5 liters 4.8 qts
Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating, resulting in rapid
wear.
Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating, resulting in rapid
wear.
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac.
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac.
59