15
LG140/160/200 ILG140EN4
OPERATION – HONDA GX160/GX200
Stopping the engine
3. Close the fuel cock.
2. Turn the start button to position O.
6. Pull out the handle to the point where you feel
strong resistance and then return it to the initial
position, then pull briskly. As the engine warms up,
gradually move the choke valve to the open position.
7. After the engine starts,set the speed lever to the low
speed position and warm it up without load for a few
minutes.
1. Throttle in neutral position. Let engine run a few
minutes.
3
2
1
6
7
L000513A
L000510A
L000065A
L000041A
To Next Page
Loading...
