Dynascan DW551DR4 - Navigating the OSD Menu; OSD Menu Structure and Settings

19
Navigating the On Screen Display (OSD) Menu
Press the MENU button on the remote control to show the OSD. Use the navigation arrows to select
and adjust the menu items.
*The change of each setting can only enable when you press “LEFT” (refer to p.18) to back to the last
menu layer.
1. Input Source
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Input Source
Main
HDMI
Set the Main input to display.
Failover 1
DP
Set the Failover 1 input to display.
Failover 2
DVI
Set the Failover 2 input to display.
Failover 3
DSM365
Set the Failover 3 input to display.
2. Picture
ITEM 1
ITEM 2
DEFAULT
DESCRIPTION
Picture
Color
Temperature
USER 2
Select the color temperature. (User2, User1,
D93, D65 and D55).
Red
Adjust the red light level. Range 0 – 100.
Note: The feature is only supported on
User2 mode.
Green
Adjust the green light level. Range 0 – 100.
Note: The feature is only supported on
User2 mode.
Blue
Adjust the blue light level. Range 0 – 100.
Note: The feature is only supported on
User2 mode.
Contrast
50
Adjust the contrast level. Range 0 – 100.
Gamma
2.2
Adjusts the Gamma value. (Native, 2.2, 2.4
and sGamma)
Sharpness
Low
Adjusts the Sharpness value. (High, Medium
and Low)