Water Diverter
Water Diverter
Air Control
Air Control
Neck Jet
Diverter
Aromatherapy
Air Controls
Waterfall
Diverter
Diverter Valves
Air Controls
Air Venturies & Diverter Valve Controls
19
This valve controls the output of the pumps to either side of the spa and
neck jets, a simple turn of the pointer toward the seat(s) will increase the
output allowed. Another turn of the pointer away from the seat(s) will
decrease the flow of the jets, or it may operate all the jets if left in the middle
position. The purpose of these valves is to increase or decrease the output
of one side or another for maximum or minimum water flow in case of one or
multiple person usage. This valve is also used to turn the master massage
jet on and off.
Each spa is equipped with either 2, 4 or 5 air controls (venturies), depending
on your model. The purpose of these controls is to regulate the mixture of air
and water to flow throughout the jets.
Waterfall Diverter
This diverter works much like the standard diverter valves, however it has
another purpose. It directly controls the Waterfall(s) that comes standard on
your spa. Simply turn the pointer in one direction or another for the desired
water flow.
To Next Page
Loading...
Need help?
General