Filtration starts as soon as flow is steady through the filter. The filter
cartridge removes the dirt from the spa water, the accumulated dirt
causes flow resistance. A dirty cartridge will decrease flow and may
cause spa not to heat properly. Therefore, regular filter cleaning is
important.
Cleaning and Replacing Filter Cartridge (100 sqft.)
For Baron 3000 owner's (50 sqft.)
Your Dynasty Spa filter has been designed for quick and easy maintenance.
Turn off power at the breaker.
Slide filter cover up and off.
Clean with a garden hose equipped with a high pressure nozzle,
or soak in filter cartridge cleaner if necessary or at every other
regularly scheduled cleaning. Rinse filter thoroughly before installing.
Screw clean cartridge back into filter canister, place weir basket
back into skimmer housing, slide filter cover back into position.
Remove weir basket to expose blue filter cartridges.
Unscrew filter cartridges and remove.
Filter Maintenance
Note: The filter should be inspected
and cleaned on a monthly basis.
21
Turn off power at the breaker.
Remove basket from filter canister, remove filter cartridge and clean
with a garden hose equipped with a high pressure nozzle, or soak in
filter cartridge cleaner if necessary or at every other regularly scheduled
cleaning. Rinse filter thoroughly before installing.
Place clean cartridge in filter canister
Replace basket weir in filter canister.
To Next Page
Loading...
Need help?
General