Measurement
15
5. If the displayed value does not match with
your expectation, repeat the measurement or
calibrate the OxySpy. See "Calibration" page 11.
6. Record the results of your measurement.
7. After quickly pressing the push button, the
OxySpy will calculate the MOD based on the
measured
O
2
values and the chosen pp
O
2
limit.
The indicated maximum operation depth will be
rounded to 0.1 mtr. or 1 ft.
If the selected pp
O
2
limit is higher than 1.6 bar,
the pp
O
2
symbol will flash to warn the diver.
8. By pressing the push button once more the
OxySpy returns to measuring mode.
Repeat the measurement until you are sure
that
you measured the actual oxygen percentage
of
the gas mixture.
English
To Next Page
Loading...