TECHNICAL INFORMATION
DYNATRON® T3™ HI-LO TREATMENT TABLE & T4™ TRACTION TABLE | OPERATOR’S MANUAL REV. 10 | 4/4/2018 8
Technical
Information
General Specications
Power Requirements: 110-240 V~
Current: 5.0 Amps
Frequency: 60 Hz
Phase: Single Phase
60 Hz Leakage Currents: Normal: 1µa or less
Maximum Leakage: 100 µa or less (Typ. 18 µa)
Grounding Characteristics: Resistance from ground pin on power plug to exposed metal surfaces:
.1 Ohm or less (Typ. .08 Ohms)
Disposal of Equipment and Accessories
ere is no risk posed in disposal of this equipment or its accessories. is product contains no hazardous materials.
CAUTION
To ensure proper mechanical operation, a daily check and preliminary operation of the table controls is
recommended prior to placing a patient on the table.
To Next Page
Loading...
