BX30 Owner’s Manual
6
Inlet section
Figure 2.
AC inlet
AC inlet
This is a grounding-type plug.
Do not connect to a convenient AC outlet on a sound system or non-grounding AC
outlet.
Power switch
0:
1: There is voltage on the amplifier.
The
Protection
LED lights up, red.
Voltage switch
115/230: The amplifier’s power supply can be used with various voltages, 115/230 V ~, and
frequencies, 50/60 Hz.
The voltage selector switch on the back panel of the subwoofer shall be positioned
according to the required voltage in your area. The manufacturer fixes the setting
prior to shipping.
Caution
Do not try to alter the voltage setting, as doing so will result in a blown fuse. Wrong
settings may result in damaged electronics.
Fuse-drawer
The main fuse for the subwoofer is located in the Fuse-drawer.
For continued protection against risk of fire, replace only with same type of fuse.
Replace
115 V:
230 V:
8 A / 125 V Slow-blow
4 A / 250 V Slow-blow
To Next Page
Loading...
Need help?
General
