Operation
Owner’s manual 7
to assist your speakers. When used with
a subwoofer it is recommended to use
either 60Hzor80Hzfilter,thusallowinga
higherundistorted sound pressure level.
8. Level trim
Use this switch to match the sensitivity
of the Excite X14A to your source.
High-output Source: If your source has a
high output, set switch to the -10 position
to reduce sensitivity by 10 dB.
Low-output source: If your source has a
low output, set switch to the +4 position
to gain 4 dB more sensitivity.
Protection
The Excite X14A has several built in
protection systems to reduce the risk of
hazard or damage due to overloading.
Both power amplifiers have thermal
protection. This activates if a problem
should occur, and helps protect both the
electronics and the loudspeaker drivers.
The woofer channel has a built in
limiter that protects the woofer unit from
too much excursion. It works by reducing
the gain of the circuit when a certain
threshold level is reached.
Positioning
The Excite X14A is designed as
a precision speaker and can be
equally well used in both stereo and
surround setups. Optimal performance
is achieved when positioned 1 to 3 meters
from the listener.
Forbest results, the speakers should
be aimed towards the listener in both
vertical and horizontal planes.
To Next Page
