Dyness B3 - Security, Fire Safety, and Unpacking

B3 ESS Unit User Manual
©Dyness reserves the copyright of this document.
16
Verify that the maximum operating current of the battery-powered user equipment
(inverter DC input) should be less than the maximum discharge current of the products
used in Table 2-2.
The security check
Firefighting equipment should be provided near the product, such as portable dry
powder fire extinguisher.Automatic fire fighting system shall be provided for the case
where necessary.
No flammable, explosive and other dangerous materials are placed beside the battery.
Unpacking inspection
When the equipment arrives at the installation site, loading and unloading should be
carried out according to the rules and regulations, to prevent from being exposed to sun
and rain.
Before unpacking, the total number of packages shall be indicated according to the
shipping list attached to each package, and the case shall be checked for good condition.
In the process of unpacking, handle with care and protect the surface coating of the
object.
Open the package, the installation personnel should read the technical documents, verify
the list, according to the configuration table and packing list, ensure objects are complete
and intact, if the internal packing is damaged, should be examined and recorded in
details.
Table 3-1 Packing list
Item
Specification
Quantity
Figure
Battery-B3
48V/75Ah
480×360×130mm
1
Power cable-
positive
Red/25mm
2
/L2050m
m
Optional:If you
need,Please
contact the
dealer to
purchase
Power cable-
negative
Black/25mm
2
/L2050m
m
Optional:If you
need,Please
contact the
dealer to
purchase