Dynex DX-19LD150A11 User Manual (English)

Other manuals for Dynex DX-19LD150A11

Quick Setup Guide2 pages

Important Information12 pages

Questions and Answers:

M
Michael MichaelAug 31, 2025
How to fix no color, dark picture, or incorrect color on Dynex DX-19LD150A11?
- M
  Michael WoodardAug 31, 2025
  If your Dynex TV/DVD combo displays no color, a dark picture, or incorrect color, try the following: * Try another channel, as the station may be experiencing problems. * Adjust the color saturation. * Make sure that the video cables are connected correctly and securely to the back of your TV/DVD combo. * Make sure that the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see “Checking the digital signal strength” in the User Guide. * If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
C
Connor JohnsonAug 30, 2025
What to do if Dynex TV DVD combo shows only snow (noise) on the screen?
- E
  earllaneAug 30, 2025
  If your Dynex TV/DVD combo only shows snow (noise) on the screen, try another channel. The station may be experiencing problems. Also, make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see “Checking the digital signal strength” in the User Guide. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
M
martinezchristopherAug 29, 2025
How to fix Dynex TV DVD combo with good picture, but no sound?
- S
  Stephanie RossAug 29, 2025
  If your Dynex TV/DVD combo has a good picture but no sound, try these steps: * Increase the volume. * Make sure that the sound is not muted. * Ensure the correct audio mode is selected. * Check that the audio cables are connected correctly and securely to the back of your TV/DVD combo. * Verify that the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. * Try a new set of audio cables, as the ones you are using may be bad.
S
sherry10Aug 28, 2025
What to do if Dynex DX-19LD150A11 remote control does not work?
- S
  Scott HallAug 28, 2025
  If the remote control for your Dynex TV/DVD combo is not working, ensure the following: * The power cord is correctly connected to your TV/DVD combo and a power outlet. * There are no obstructions between the remote control and the remote control sensor on the front of the TV/DVD combo. * Point the remote control directly at the remote control sensor on your TV/DVD combo. * The batteries are installed correctly. * Replace dead batteries with new ones.
L
Luke HillAug 28, 2025
Why Dynex DX-19LD150A11 has no picture and no sound?
- D
  David SmithAug 28, 2025
  If your Dynex TV DVD combo has no picture and no sound, try the following: * Press the power button on the TV/DVD combo or the remote control. * Ensure the video cables are securely connected to the back of your unit. * Adjust the contrast and brightness. * Make sure the power cord is plugged in. * Select the correct video input source. * Try another channel to rule out station issues. * Confirm the incoming signal is compatible. * Check that the antenna or cable TV is correctly and securely connected. * Review the closed caption settings, as some TEXT modes can block the screen.
B
Brad FarmerAug 27, 2025
Why does my Dynex DX-19LD150A11 have picture problems but good sound?
- S
  Sarah TaylorAug 27, 2025
  If you have dark, poor, or no picture (screen is lit) but good sound on your Dynex TV DVD Combo, try another channel. Make sure the antenna or cable TV is connected correctly and securely. Ensure the 'Audio Only' option is set to Off. Adjust the brightness and make sure that the correct picture mode is selected. If using an antenna, the digital channel signal may be low. Make sure that the video cables are connected securely. The video cable(s) you are using may be bad.
L
lisasimonAug 27, 2025
Why does my Dynex DX-19LD150A11 keep turning off?
- T
  terri40Aug 27, 2025
  If your Dynex TV DVD combo keeps turning off, make sure that the sleep timer is not turned on.
D
Diana JacksonAug 26, 2025
How to fix “No signal” error on Dynex DX-19LD150A11 TV DVD Combo?
- D
  Deanna MartinAug 26, 2025
  If your Dynex TV DVD Combo displays a “No signal” error message, press the INPUT button and select the correct input for the device or service you are using. If you are using a cable or satellite box, use the remote that came with that box to change channels.
M
Maria BurgessAug 25, 2025
Why is my Dynex TV DVD Combo remote control not working?
- K
  kennethburtonAug 26, 2025
  If the remote control for your Dynex TV DVD Combo is not working, make sure that the power cord is correctly connected to your TV/DVD combo and a power outlet. Ensure there are no obstructions between the remote and the sensor on the TV. Point the remote directly at the sensor. Make sure the batteries are installed correctly and replace dead batteries with new ones.
D
Debra BentonAug 25, 2025
Why does my Dynex DX-19LD150A11 TV DVD Combo have picture but no sound?
- L
  Linda HubbardAug 25, 2025
  If your Dynex TV DVD Combo has good picture but no sound, first increase the volume and make sure that the sound is not muted. Then, ensure that the correct audio mode is selected and the audio cables are connected correctly and securely. Also, check that the antenna or cable TV is connected correctly. If using an antenna, the digital channel signal may be low. The audio cables you are using may be bad.

Dynex DX-19LD150A11 Specifications

General

Brand	Dynex
Model	DX-19LD150A11
Category	TV DVD Combo
Language	English

Summary

CHILD SAFETY

Tune into safety

Safety guidelines for TV stand placement and child interaction.

Wall mounting safety

Safety precautions for wall-mounting the TV.

Important safety instructions

Product warnings

Warnings regarding electric shock, lightning, power lines, and LCD panel handling.

Replacement parts safety

Guidelines for using correct replacement parts for safety.

Post-service safety check

Importance of safety checks after service or repair.

Safety cautions

Servicing precautions

Conditions requiring professional servicing for the TV/DVD combo.

Outdoor antenna grounding

Guidelines for grounding outdoor antennas for protection.

Condensation precautions

How to handle condensation to prevent performance issues.

Mobile telephone interference warning

Warning about potential interference from mobile phones.

End of life disposal

Information on proper disposal of the product.

Non-active pixels explanation

Explanation of non-active pixels on the LCD panel.

Installing stand or wall-mount bracket

Installing the TV stand

Step-by-step instructions for attaching the TV stand.

Installing a wall-mount bracket

Instructions for attaching the TV to a wall-mount bracket.

TV/DVD combo components

Package contents

List of items included in the product package.

Remote control overview

Making connections

Choosing the best connection

Guide to selecting the optimal connection type for video quality.

Connection cautions

Important notes and warnings for making connections.

Connecting power

Connecting cable or satellite box

Connecting via HDMI

Step-by-step guide for connecting via HDMI.

Connecting via DVI

Instructions for connecting a DVI device using HDMI.

Connecting via component video

Connecting via composite video

Connecting via coaxial cable

Connecting antenna or cable TV

Connecting DVD or Blu-ray player

Connecting DVD/Blu-ray via HDMI/DVI

Steps to connect a DVD/Blu-ray player using HDMI or DVI.

Playing from DVD/Blu-ray player

How to select the input source and play content.

Connecting VCR or DVD player

Connecting VCR/DVD via component

Steps to connect a VCR/DVD player using component cables.

Playing from component video

How to select the input source for component video.

Connecting a VCR

Connecting VCR via A/V cable

Instructions for connecting a VCR using an A/V cable.

Playing from VCR

How to select the input source and play content from a VCR.

Connecting VCR/DVD via S-Video

Connecting a computer

Connecting computer via VGA

Instructions for connecting a computer using a VGA cable.

Connecting computer via HDMI

Instructions for connecting a computer using an HDMI cable.

Connecting a USB flash drive

Connecting headphones

Connecting home theater system

Connecting via digital audio

Steps to connect a home theater system using digital audio.

Connecting via analog audio

Steps to connect a home theater system using analog audio.

Using the remote control

Installing remote control batteries

Instructions for inserting batteries into the remote control.

Aiming the remote control

How to point the remote control for proper operation.

First-time setup wizard

Setting up the TV/DVD combo

Guided steps for initial setup of the TV/DVD combo.

Understanding the basics

Turning TV/DVD combo on/off

How to power the TV/DVD combo on and off.

Selecting video input source

How to choose the active input source for viewing.

Using the DVD player

Starting DVD playback

Steps to insert a disc and begin playback.

DVD playback controls

Explanation of buttons for playback control.

Removing a disc

How to eject and remove a disc.

Changing DVD settings

Viewing photos

Viewing photos from USB

Steps to view photos from a USB flash drive.

Viewing favorite photos

How to access and view marked favorite photos.

Viewing photos in slide show

Customizing slide show settings

Using on-screen menus

On-screen menu overview

Explanation of the on-screen menu structure and navigation.

Navigating menus

Selecting a channel

Adjusting volume

Viewing channel information

Adjusting picture settings

Adjusting TV picture

Steps to adjust picture modes, brightness, contrast, etc.

Adjusting aspect ratio

Options for changing the picture's aspect ratio.

Adjusting computer image

Setting power on vivid mode

Adjusting sound settings

Selecting sound mode/language

How to choose sound modes or audio languages.

Adjusting sound settings

Fine-tuning treble, bass, balance, and auto volume.

Playing TV audio only

Changing channel settings

Automatically scanning channels

How to scan for available TV channels.

Performing automatic channel scan

Step-by-step guide to auto-scan channels.

Hiding channels

Setting up favorite channels

Viewing favorite channels

Adding/changing channel labels

Checking digital signal strength

Setting parental controls

Setting/changing password

How to set or modify the parental control password.

Setting parental control levels

How to set rating levels to block programs.

Setting parental control levels

Blocking unrated TV

Locking control buttons

Setting the sleep timer

Adjusting menu settings

Selecting menu language/transparency

How to change the on-screen menu language and transparency.

Labeling input sources

Restoring default settings

Maintaining the TV/DVD combo

Cleaning the TV/DVD combo

Instructions for cleaning the product's surfaces and screen.

Servicing the TV/DVD combo

Information about authorized servicing and repair.

Care and handling of discs

Guidelines for handling and cleaning discs.

Troubleshooting

Video and audio problems

Solutions for common video and audio issues.

Remote control issues

Solutions for problems with the remote control.

General troubleshooting

Disc playback troubleshooting

USB photo display troubleshooting

Product specifications

Programming universal remotes

Programming a different universal remote

Instructions for programming external universal remotes.

Additional help for remote programming

Resources for further assistance with remote controls.

Legal notices

One-year limited warranty

Warranty definitions

Explains terms used in the warranty statement.

Warranty coverage duration

Details on the length of the warranty period.

What the warranty covers

Information on what is included in the warranty.

Obtaining warranty service

Steps to follow to get warranty service.

Warranty validity regions

Specifies where the warranty is applicable.

What the warranty does not cover

Exclusions from the warranty coverage.

Common universal remote codes

FCC Part 15 compliance

Canada ICES-003 statement

HDMI information

Open Source Software information

Related product manuals

Dynex DX-19LD150A11 User Manual

Table of Contents