2 System Software
The System Software menu does not have any settings requiring configuration, but Dynon does
provide configurations files that can be loaded into SkyView using the System Software menu.
These files will accomplish much of the systems configuration settings covered by this manual.
These files can be downloaded to a USB drive and then loaded onto SkyView using the LOAD
FILES wizard.
The Systems Software menu will not be active unless a USB Drive is mounted to the display
USB port.
The SYSTEM SOFTWARE Menu contains links to the following wizards:
• UPGRADE SYSTEM SOFTWARE. – Use this wizard to update Software on your
SkyView system.
• LOAD FILES – Use this wizard to load files such as settings or configuration files or delete
files from the USB flash drive.
• EXPORT SETTINGS – Use this wizard to export the settings on your SkyView system to
a USB flash drive.
• EXPORT USER DATA LOGS – Use this wizard to export user data logs in human-
readable CSV format.
• EXPORT USER WAYPOINTS – Use this wizard to export the User Waypoints that are
currently stored in your SkyView system.
• EXPORT DYNON DIAGNOSTIC FILE – This specialized data log can only be interpreted
by Dynon Avionics personnel; there is no data in it that can be interpreted by SkyView
pilots. Dynon Avionics Technical Support may request this log during troubleshooting,
especially for issues related to AP performance. Note that this log is very big – over 500
MB – and takes minutes to save to a USB flash drive. Unless directed to export this log
by Dynon Avionics, there is no reason to do so
To Next Page
