Dyson Purifier Hot+ Cool - Assembling Your Dyson Purifier; Dyson Purifier Hot+Cool (HEPA+Carbon Filter); Dyson Purifier Hot+Cool (Separate HEPA & Carbon Filters); Dyson Purifier Hot+Cool Formaldehyde

Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Assemble your machine with the filters that are supplied.
Dyson Purifier Hot+Cool
Supplied with a HEPA+Carbon filter.
Push your HEPA+Carbon filter into the outer cover and position onto the
base. Push firmly until both outer covers click securely into place.
Clik
Dyson Purifier Hot+Cool
Supplied with separate HEPA and carbon filters.
Push the carbon filters into place on the machine.
Push the HEPA filter into the outer cover. Put the outer covers into position
on the base and push firmly until they both click securely into place.
Dyson Purifier Hot+Cool Formaldehyde
Your machine comes with a permanent catalytic filter and a HEPA+Carbon
filter.
Push the catalytic filter into position on the machine.
Push the HEPA+Carbon filter into the outer cover and position on the base.
Push firmly until both outer covers click into place.
Clik
Getting started
Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.
Standby on/off Information menu
Airflow speed
Auto mode
Oscillation on/off Airflow direction
Night mode
Remote control
Standby on/off
Sleep timer
Cooling mode
Heating control