Information menu
Press this button to scroll through the information being monitored by your
Dyson purifying fan heater.
Information about air quality, temperature, humidity and filter levels is shown
on the LCD screen.
When a particular type of pollutant causes air quality to decrease, a symbol
for the pollutant will show on the LCD screen.
Indoor air quality - 12 seconds
Monitor the current air quality with a graph
showing the last 12 seconds of data.
Particulate matter (PM10)
Larger microscopic particles up to 10 microns
in size, suspended in the air we breathe. These
include dust, mould and pollen.
Nitrogen dioxide and other oxidising gases
These potentially harmful gases are released
into the air by combustion, for example, the
burning gas when cooking and in vehicle
exhaust emissions.
Indoor humidity
The amount of water vapour in the air,
shown as a percentage.
Formaldehyde (HCHO)
A common indoor pollutant. It can be
released for many years from furnishings,
floorings and glue.
Particulate matter (PM2.5)
Microscopic particles up to 2.5 microns in size,
suspended in the air we breathe. These include
smoke, bacteria and allergens.
Volatile organic compounds
VOCs are typically odours that may be
potentially harmful. These can be found in
cleaning products, paints and furnishings.
Indoor temperature
Monitor the ambient temperature to help
maintain a comfortable environment.
Filters
The remaining filter life is shown
on the LCD screen and will
indicate when your filters need
replacing.
Wi-Fi
The current status of connection to
the Wi-Fi network.
To Next Page
Loading...
Need help?
General
