Dyson Purifier Humidify+Cool User Manual

Step 7
Rinse
Unclip the cap, take the evaporator out of the water tank and rinse under
a cold tap.
Wipe away any excess water to avoid drips and place the evaporator to
one side.
Rinse the water tank under a cold tap. Wipe the inside of the tank to
remove any excess solution and any debris.
Step 8
Refill
MAX
level
Refill the water tank to the Max level and wipe off any excess water and
replace the cap, making sure that the cap clips are secured.
Step 9
Reassemble
Push the evaporator back into your machine, making sure that it is securely
in position.
Close the inner door and replace the outer covers.
Make sure the cap is completely dry. If wet, wipe thoroughly with a dry cloth.
Slide the water tank back into your machine and make sure it is securely
inplace.
The evaporator is inserted
behind the door that springs
open when pressed, inside
your machine.

Dyson Purifier Humidify+Cool Specifications

General

Package width	350 mm
Package height	1000 mm
Package weight	12120 g
Filter life (max)	12 month(s)
AC input voltage	240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	43.4 W
Display type	LCD
Product color	Silver, White
Housing material	Acrylonitrile butadiene styrene (ABS)
Airflow	43.5 l/s
Noise level	62.4 dB
Air purify rate	- m³/h
Number of speeds	10
Country of origin	Malaysia
Oscillation angle	90 °
Suitable for room area up to	- m²
Suitable for room volume up to	81 m³
Harmonized System (HS) code	8421392590

Weight and Dimensions

Depth	312 mm
Width	220 mm
Height	923 mm
Weight	8050 g