Dyson Purifier Humidify+Cool User Manual

Changing your HEPA+Carbon filter
x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
SCONON-SCOSCONON-SCO
Scaled 81% for QSG to maintain minimum line weight
Original scale
clik
clik
clik
clik
clik
clik
MAX
clik
clik
clik
clik
clik
clik
MAX
Supplied with a HEPA+Carbon filter.
To change your HEPA+Carbon filter, push down on the buttons either side
of your machine to release the outer cover. Push down on the tabs to remove
the filter.
Push the replacement filter into the outer cover and make sure the tabs click
into place.
Put the outer covers into position on your machine and push firmly until they
both click securely into position.
Plug in and switch your machine, and reset your filter life.
Resetting your filter life
5, 4, 3, 2, 1...
It’s important to reset your filter life after you have replaced your filter.
Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five, ending with
default screen.
The filter life has been reset and your machine is ready to use.
The purifying humidifying fan with the filter covers open
showing a HEPA plus carbon filter located in the filter covers
and a catalytic filter. Arrows demonstrate that the catalytic filter
is fitted directly to the base of the machine and the filter covers
will need to be assembled onto the base of the machine.

Dyson Purifier Humidify+Cool Specifications

General

Package width	350 mm
Package height	1000 mm
Package weight	12120 g
Filter life (max)	12 month(s)
AC input voltage	240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	43.4 W
Display type	LCD
Product color	Silver, White
Housing material	Acrylonitrile butadiene styrene (ABS)
Airflow	43.5 l/s
Noise level	62.4 dB
Air purify rate	- m³/h
Number of speeds	10
Country of origin	Malaysia
Oscillation angle	90 °
Suitable for room area up to	- m²
Suitable for room volume up to	81 m³
Harmonized System (HS) code	8421392590

Weight and Dimensions

Depth	312 mm
Width	220 mm
Height	923 mm
Weight	8050 g