Dyson Purifier Humidify+Cool User Manual

Looking after your machine
To always get the best performance from your Dyson purifying fan,
it’s important to regularly clean it and check for blockages.
Cleaning your machine
If your machine is dusty, wipe with a damp lint-free cloth.
Look for blockages in the air inlet holes on the filter and the small
aperture inside the loop amplifier.
Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.
Alerts
Continuous alert icon
Switch off and unplug your machine.
Leave for 10 seconds and then plug your machine back in and switch it on.
If the alert icon continues to show on the LCD screen, contact Dyson.
Temporary alert icon
If the alert appears on the LCD screen and then disappears,
continue to use your machine.
If any other alert icons show on the LCD screen,
contactDysonforfurther advice.

Dyson Purifier Humidify+Cool Specifications

General

Package width	350 mm
Package height	1000 mm
Package weight	12120 g
Filter life (max)	12 month(s)
AC input voltage	240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	43.4 W
Display type	LCD
Product color	Silver, White
Housing material	Acrylonitrile butadiene styrene (ABS)
Airflow	43.5 l/s
Noise level	62.4 dB
Air purify rate	- m³/h
Number of speeds	10
Country of origin	Malaysia
Oscillation angle	90 °
Suitable for room area up to	- m²
Suitable for room volume up to	81 m³
Harmonized System (HS) code	8421392590

Weight and Dimensions

Depth	312 mm
Width	220 mm
Height	923 mm
Weight	8050 g