EasyManua.ls Logo

DYTECH GT02 - Installation instructions; Preparation; Installation

DYTECH GT02
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Installation instructions
4.1 Preparation
Choose SIM card, need insert a GSM SIM card into device.
Notice: Please insert SIM card before turning the device power
switch to on; The SIM card need open the GPRS function; Please make
sure SIM card with full balance.
4.2 Installation
The device is hidden type installation, we suggest the device installing by
professional institution. Please pay attention to the following points:
4.2.2 The device has built-in GSM and GPS antenna, make sure the
receive side upward and there is no metal shielding.
4.2.3 Recommended installation place: The hidden place in the board
below the front windscreen; The hidden place around former
dashboard (nonmetal material for skin); The hidden place in the board
below the back windscreen.
Notice: If the windscreen glued by metal thermal insulation layer or
heating layer, it will reduce the GPS receive signal and lead to GPS work
disorder, then please change the installation place.
4.3 Device light description
Light
Signal
Normal status
Red light
Power
Stable light on
Yellow light
GSM signal
Stable light on
Blue
GPS signal
Stable light on