6. Device Parameter Settings
6.1 Initialization
Send SMS “#begin#password#” to the tracker, it will reply “begin ok”.
(Default password:123456).
For example, send SMS “#begin#123456# ”, If succeeded, it will reply
“begin ok”.
6.2 Set password
6.2.1Set: Send SMS: “#password#old password#new password#” to
the unit to change the password.
For Example, send SMS: “#password#123456#666888#” to device, it
will reply SMS: “password OK”.
6.2.2 Make sure the new password is in 6 digits arabic numbers, or the
device cannot recognize the password.
6.2.3 Resume original password: send SMS: “#resume#” to the device, it
will reply SMS: “resume password, password is 123456”.
6.3 Authorization
6.3.1 Set authorization: send SMS “ #admin#password#cell phone
number#” to set up authorized number, device will reply “admin ok”.
6.3.3 Delete authorization send SMS“#noadmin#password#authorized
number#”to delete the authorized number, device will reply “no admin
ok”.
6.4 Single Locating
6.4.1 If there is no authorized number, any number dials up the device
number, it will report tracking message; If already set authorized number,
To Next Page
Loading...