EasyManua.ls Logo

DYTECH GT02 - Overspeed alarm; Geo-fence

DYTECH GT02
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
“tracker ok!” and restore to “track” mode.
6.7 Overspeed alarm
6.7.1 Set up: Send SMS:“#speed#password#speed number in 3 digits#
to the device (suppose the speed is 80km/h), EG, send SMS
“#speed#123456#080#”, and it will reply speed ok ”. When the car
moves exceeding 80 km/h, the unit will send SMS alert “speed alarm” to
the authorized number.
6.7.2 Cancel: send SMS #nospeed#password# to deactivate the
overspeed alarm. It will reply “cancel speed ok”.
6.8 Geo-fence
Set up geo-fence for the unit to restrict its movement within a district.
The device will send message to the authorized number automatically
when it exceed the district.
6.8.1 Set up
When the unit stays immobile in a place, send SMS:
#stockade#password#semidiameter#to unit to set the restricted
district. In case of breach, it will send SMS stockade! + Geo-info to the
authorized number.
For example, Send SMS: “#stockade#123456#3#”, “3” represents 300
meters.
6.8.2 Cancel: Send SMS: “#nostockade#password#” to deactivate this
function, it will reply no stockade ok”.