E.C.A. Proteus Plus - Product Notation; Technical Data

Plate heat exchanger makes hot water more efficient in monothermic types.
The safety systems in your appliance provide entire safety for you and your appliance. The safety
systems are:













Flue Gas Safety System
Flame Failure Safety System
Over-heat Safety System (105
0
C)
DHW (Domestic Hot Water) Over-heat Safety System (71
0
C)
High Water Pressure Protection System (3 bar)
Low Water Pressure Protection System (0,6 bar)
Low Voltage Protection System (165 VAC)
Thermal Accumalation Protection System (with by-pass circuit and “pump over-run”)
Frost Protection System (The appliance must be on stand-by mode to activate frost protection system)
Pump Anti-sieze Function
3 Way Anti-sieze Function (in monothermic types)
Automatic Air Vent
Expansion Vessel (7lt)
Product Notation
Table 1
Technical Data
Proteus Plus 23,3 kW room sealed fan assisted gas combination boiler is a C type boiler (EN 483).
C type boilers have a sealed combustion chamber. Required fresh air for combustion is provided
independently from the installation room by concentric air/flue ducts and products of combustion can
be also discharged
appliances.
by
the
same
air/flue
ducts.
Therefore,
they are
named
as air
independent
gas
5
Notation
D e s criptio n
PRP 24 HM
Proteus Plus 23,3 kW Room Sealed Fan Assisted Gas Combination Boiler (monothermic type)