Need help?Do you have a question about the E.C.A. Proteus Plus and is the answer not in the manual?
Key safety advice for appliance use and gas leak scenarios.
Requirements for water and gas supply lines before boiler installation.
Procedure for converting the boiler between different gas types.
Mandatory guidelines for safe and compliant boiler installation.
Steps and checks for safely initiating the boiler's operation.
Guidelines for correct boiler operation and routine maintenance tasks.
Overview of the boiler's features, design, and components.
Identification of the specific model and notation for the appliance.
Detailed technical parameters and performance metrics of the boiler.
Information on the product's packaging, dimensions, and included parts.
Guidelines for choosing the optimal location for boiler installation.
Instructions for physically mounting the boiler onto the wall bracket.
Details on connecting the flue system for room-sealed fan-assisted operation.
Specific instructions for connecting horizontal concentric air/flue ducts.
Instructions for connecting air and flue ducts separately.
Instructions for connecting vertical concentric air/flue ducts.
Details on optional pipes and nipples for water and gas connections.
Guidelines for safe electrical installation and earthing.
Information on compatible Honeywell room thermostats for temperature control.
Essential final checks and operations before and after boiler start-up.
Description of the boiler's control panel elements and their functions.
Handling error codes and resetting the boiler.
Using the manometer and optional timer for boiler control.
Instructions for starting up and shutting down the boiler.
Guide on setting weekly programs for the optional timer.
How to select between summer and winter modes for central heating.
Details on frost protection levels and pump anti-seize function.
Setting programs, ignoring, manual control, and resetting the timer.
Steps for converting the gas type, including pressure and parameter adjustments.
Detailed steps for adjusting maximum and minimum gas pressures.
Instructions for replacing burner injectors based on gas type.
Adjusting the gas type parameter after conversion.
How error conditions are displayed by LED's and heat demands.
Table listing error codes, their causes, and solutions.
Requirements for annual servicing and cleaning of the boiler.
Adherence to installation and operation standards and local regulations.
To Next Page
General
