Need help?Do you have a question about the E-FLITE Beechcraft Staggerwing 480 ARF and is the answer not in the manual?
General| Power Type | Electric |
|---|---|
| Construction | Balsa and plywood |
| Skill Level | Intermediate |
| Recommended Environment | Outdoor |
| Servos | 4 servos required |
| Recommended Battery | 1800-2100mAh 3S LiPo |
| Radio | 4+ channel transmitter and receiver required |
| Motor Size | 480 brushless outrunner, 960 Kv |
Details safety measures for components like propellers, batteries, and small parts.
Detailed steps for installing the aileron servo and linkage.
Step-by-step guide for installing the flap servo and connecting its linkage.
Locating and preparing the wing for landing gear mounts.
Attaching the landing gear mounts to the wing.
Installing the retract servo and pushrod linkage.
Connecting air lines to the retract valve.
Installing the fill valve and connecting air lines.
Installing the landing gear retract mechanisms into the wing.
Positioning and affixing the horizontal stabilizer.
Installing the tail wheel assembly and related parts.
Installing the steering arm and connecting tail wheel components.
Positioning and marking the fuselage for the elevator servo.
Connecting the elevator servo horn and pushrod.
Attaching the motor to the fuselage mount.
Assembling and mounting the propeller, spinner, and securing the ESC.
Securing the bottom wing to the fuselage.
Identifying and marking the correct center of gravity point.
To Next Page