Need help?Do you have a question about the E-FLITE Opterra and is the answer not in the manual?
General| Replica | No |
|---|---|
| Wing area | 2820 cm² |
| Motor size | 480 |
| Motor type | Brushless |
| Engine type | Electric engine |
| Servo weight | 13 g |
| Housing material | Carbon, Foam |
| Number of servos | 2 |
| Construction type | Plug-N-Play(PNP) |
| Electronic speed control (ESC) | Yes |
| Recommended battery | 2200–3200mAh 3–4S LiPo |
| Number of batteries supported | 1 |
| Product color | Black, Red, White |
Weight and Dimensions| Length | 525 mm |
|---|---|
| Weight | 980 g |
| Wingspan | 1200 mm |
Details transmitter setup for BNF, including channel assignments and switch functions.
Step-by-step guide for programming Spektrum transmitters for optimal control.
Essential parameters like Dual Rates, Control, and Flight Timer for PNP versions.
Step-by-step procedure to bind the transmitter to the aircraft's receiver.
Recommendations for suitable Li-Po batteries and fitting for proper weight balance.
Explains the three SAFE Plus flight modes (Safe, Altitude Hold, AS3X) and their characteristics.
Detailed steps to activate and manage the automated landing sequence.
To Next Page