E8500
E8500 Ordering Code
Table A - Electrochemical Sensors
O O2 Sensor (0 - 25 %)
C CO Sensor (0 - 8000 ppm) with Dilution Auto-Range up to 20,000 ppm
N NO Sensor (0 - 4000 ppm)
D NO2 Sensor (0 - 1000 ppm)
S SO2 Sensor (0 - 4000 ppm)
H H2S Sensor (0 - 500 ppm)
P: 215-750-1212 F: 215-750-1399 A: 172 Middletown Blvd, Ste B201 Langhorne, PA 19047
E Instruments International www.E-Inst.com
Part # 8500 - Table A - Table B- Table C
Table B - NDIR (non-dispersive infrared) Sensors
ABC CO2 Sensor (0 - 20 %), CxHy Sensor (0 - 3 %), and High CO Sensor (0 - 15 %)
0 No NDIR sensors
Table C - Sampling Probes and Hoses
12 12” (300mm) Probe, 1470F (800C) max, with 10’ (3m) Dual Hose
30 30” (750mm) Probe, 1470F (800C) max, with 10’ (3m) Dual Hose
40HT 40” (1m) Probe, 2190F (1200C) max, with 10’ (3m) Hose for
High Temperature Combustion Applications
60HT 60” (1.5m) Probe, 2190F (1200C) max, with 10’ (3m) Hose for
High Temperature Combustion Applications
Standard E8500 Configuration (E8500-OCN-0-12) Includes the following:
O2, CO, and NO gas sensors, thermoelectric chiller with automatic condensate drain pump,
rechargeable battery pack, 110-240VAC/50-60Hz battery charger, 12”/300mm probe with 10’/3m
dual hose, stack gas & air temperature measurements, draft & differential measurements,
calculated values for efficiency, excess air, & CO2%, internal memory, real-time software package
with Bluetooth module for PC, wireless communications, protective carrying case, calibration
certificate, and operations manual.
Weight: 11 lbs. (5 kg) Dimensions: 10x6x9.5” (26x15x24 cm)
Document 8500.9 - Information & design subject to change at the manufacturer’s discretion
To Next Page
Loading...
