E8500 Instruction & Operations Manual
version 1.010
Page 4 of 45
ANALYZER OPTIONS
The E INSTRUMENTS Model 8500 is an extremely versatile emissions measurement
system that meets practically all emissions requirements. It has been designed as a
modular system, permitting the installation, in the field, of most of the various available
options. This manual describes the complete instrument equipped with all the options.
E8500 standard capabilities include 12”/300mm stainless steel probe (1470ºF/800ºC
max.) with dual hose latex sampling line, ambient and stack temperature
measurements, O2, CO, & NO gas sensors, dilution pump and electronic valve for dual
range CO and purging capability, draft & differential pressure measurements, 1000
internal storage tags, wireless remote printer, Bluetooth wireless PC communications,
EGAS Windows
TM
software, custom fuel programming option, and extensive help
screens. The available options are separated into two categories:
1. ANALYZER SENSORS
• Nitrogen dioxide (NO
2
) sensor - 5-Series electrochemical sensor
• Sulfur dioxide (SO
2
) sensor – 5-Series electrochemical sensor
• Hydrogen sulfide (H
2
S) sensor – 4-Series electrochemical sensor
• Carbon dioxide (CO
2
) – non-dispersive infrared (NDIR) sensor
• Hydrocarbon (CxHy or HC) – non-dispersive infrared (NDIR) sensor
• High Carbon monoxide (CO) – non-dispersive infrared (NDIR) sensor
2. SAMPLE EXTRACTION & TRANSPORT SYSTEMS
A. Stainless steel probe with dual hose latex sample line (1470ºF/800ºC max.) in
probe lengths of 12”/300mm (standard) or 30”/750mm (optional)
B. Inconel probe (2200ºF/1200ºC max.) with Viton sample line in various probe
lengths
To Next Page
Loading...
