E-max Gaming Corporation, Inc.
82
General Features of Ball Console
• 75 ball console
• Slate gray cabinet with black trim, modular design
• Red / Green / Silver ball chamber
• Arm rest
• Heavy duty casters, rear locking, front non-locking
• Sealed Ball bearing blower motor with power on/off switch
• Hepa air filter (HH246 Filter Replacement)
• Anti-static control and metal ball tube
• Dual ball chambers for reduced noise
• Integrated digital camera
• LED ball illumination
• Spill resistant rubber ball switches
• Raised ball for easy removal from ball tray
• Integrated ball tray computer
• Filler panels with cup holder and mounting rails to adjoin consoles
• 1 set of double numbered bingo balls
• Operator manual
• 1 year warranty
Detailed System Specifications
Size:
Electronics console:
27.5” wide x 34.5” deep x 30” high, + 17” high for the monitor
196 lbs
Ball console:
40.5” wide x 34.5” deep with arm rest, x 30” high, +4.5” high for ball tube
165 lbs
Electronics and Ball console adjoined: 69” wide
Electronics and two Ball consoles adjoined: 109” wide
Environment:
Indoor use only, no condensation
Recommended Operating Temperature: 15C to 35C (59F to 95F)
Storage temperature: -5C to 45C (23F to 113F)
Regulatory:
C-UL US Listing (pending)
Electrical:
Flashboard outputs:
0 to 5V output, up to 150ma sink or source, short circuit and ESD protected
Fused for severe damage
Video outputs:
Composite video – 0 to 5V max, 75 ohm output, RCA jack
RF modulator – channel 3 or 4, 75 ohm output, Type F connector
Video inputs:
RF signal level from TV out or similar source, Type F connector
Audio outputs:
0 to 5V max, signal levels and output impedance not intended to directly drive speakers, stereo 3.5 mm
receptacle
Audio input:
Signal levels compatible with standard PC sound card, MIC IN circuitry.
To Next Page
Loading...