Speedometer
Unit: KM/H
Speed signal comes from the motor via the controller to the display.
The indicated speed depends on the motor signal and the wheel diameter.
Gear Switch
Short press the power button twice to switch between the following gears: 1 – eco (slow), 2 – drive (medium, only for PRO &
MAX), 3 – sport (fast). The higher the gear, the higher the speed.
Lights control
To turn on the lights the scooter must be turned on, and the power button must be short pressed once. Rear lights are lit
automatically when braking.
Cruise Control Function
Cruise control can easily be activated in the KingSong app. When riding the scooter, keep the acceleration handle pressed with
the same pressure for 5 seconds to activate the cruise control mode. Use the brake handle to deactivate the cruise control
mode.
Start mode selection
For safety purposes all E2S models are set by default to non-zero start mode, meaning the motor will not start until you kick
start the scooter and pass the speed of 3km/h. This can be altered in the app:
NON – Non-zero start mode (must be kick started)
ZERO – Zero start mode (the motor will start even when the scooter stands still).
EN
To Next Page
Loading...
Need help?
General
