Need help?Do you have a question about the Eagle Cuda 300 Portable and is the answer not in the manual?
General| Display Size | 4 inches |
|---|---|
| Depth Capability | 600 feet |
| Transducer Type | Single Beam |
| Frequency | 200 kHz |
| Display Resolution | 240 x 160 pixels |
| Sonar Frequency | 200 kHz |
| Beam Angle | 20 degrees |
| Power Supply | 8 AA batteries |
| Transducer Included | Yes |
| Waterproof Rating | IPX7 |
| Display Type | LCD |
| Depth Capability (meters) | 183 meters |
Steps to prepare for transducer installation, including planning cable routes.
Guidance on choosing the optimal location for transducer mounting on a boat hull.
Instructions on adjusting transducer depth for optimal water flow and protection.
Detailed steps for assembling and mounting the transducer on a transom.
Specific instructions for mounting the transducer on a trolling motor.
Instructions for connecting the sonar unit to a 12-volt power source.
Guidelines for installing the unit's mounting bracket, including dimensions.
Steps for setting up the sonar unit for portable operation with a power pack.
Instructions for assembling and mounting the portable transducer using a suction cup.
Explanation of the Cuda 300's buttons and their functions for navigation and control.
How to set and adjust the depth range for optimal readings in auto or manual modes.
Using the zoom feature to magnify sonar echoes and select zoom ranges.
To Next Page
