2
Sonar
Frequency:...................... 200 kHz (or 50/200 kHz – SeaFinder only).
Transducers: .................. A Skimmer
transducer comes packed with
your sonar unit. Single frequency models
have a 20° cone angle; dual frequency models
have 35°/12° cone angles. Both models offer a
wide fish detection area of up to 60º with
high sensitivity settings.
Transducers for FishEasy 2 family:
FishEasy 2: HS-WSX Skimmer
FishEasy 2T: HST-WSX Skimmer
FishEasy 2 Portable: PT-WSX Skimmer
SeaFinder 240DF: HST-WSU Skimmer
Transmitter: ................... 1500 watts peak-to-peak power (typical); 188
watts RMS power (typical).
Sonar sounding
depth capability: ........... 800 feet (244 meters); 1300 feet (390 meters)
at 50 kHz (SeaFinder 240DF only). Actual ca-
pability depends on transducer configuration
and installation, bottom composition and wa-
ter conditions. All sonar units typically read
deeper in fresh water than in salt water.
Depth display:................ Continuous digital readout.
Audible alarms: ............. Deep/shallow/fish.
Automatic ranging:....... Yes, with instant screen updates.
Zoom bottom track: ...... Yes.
Split-screen zoom:......... Yes.
Surface water temp: ..... Yes, with optional external temperature sen-
sor, combo speed/temp sensor or transducer
with built-in temp.
Speed/distance log: ....... Yes, with optional speed sensor.
Key features: FishReveal; HyperScroll; Grayline
; ASP; Fish I.D.
symbols; FishTrack; full one-year warranty.
Differences among the FishEasy 2 Family
The FishEasy 2 ships with a single-frequency transducer. The FishEasy
2T ships with a transducer containing a built-in temperature sensor.
The FishEasy 2 Portable includes a portable transducer and other
items that enable portable use. The SeaFinder 240DF includes a dual-
frequency transducer with built-in temp sensor and is the only unit
with dual-frequency capability.
To Next Page
Loading...
Need help?
General