Tracker 3000 deeply strips/scrubs in a 30” path with two 16” counter rotating
brushes removing multiple layers of oor nish easily with its propane
powered engine. No need for high voltage electric cords. Run time is 5 to 6
hours per propane cylinder. Available with your choice of Kawasaki, Robin
or Honda engines. Emissions protected by three-way catalytic mufer on
Kawasaki and Robin engines. Emissions shut down system, two 16” pad
drivers, and solution tank kit are available options.
Machine comes standard with service alert (hour) meter, two gear driven
16” Strata Grit Plus stripping brushes, easy change brush to pad drivers,
transport wheel, adjustable handle, aluminum safety-ll fuel cylinder with
overll prevention device (OPD) (UL and DOT approved), and two year
warranty.
Designed and manufactured in the U.S.A.
Tracker 3900
Production 20,000 sq ft/hour
Engine Speed 3,200 rpm
Cleaning Path 30”
Brush Speed 320 rpm
Brush Size Two 16” counter rotating brushes
Machine Dimensions L 53” x W 30.5” x H 42”
Total Weight 450 lbs
All engines exceed Environmental Protection Agency (EPA) and California Air Resource Board (CARB) regulations for exhaust emissions.
Features:
Tracker 3000
Deep scrub or strip
30” cleaning path
Two 16” gear driven brushes
Low profile 4” deck
No-flat 10” tires
Centrifugal clutch
Gear box driven
EPA & CARB approved
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
Loading...