5
1. Touch button: The touch button is used to activate
the WiFI interface which is then used to configure
the backplate during installation. This must be
done by a certified electrician. Afterwards the WiFI
interface can be used as a fallback solution for
controlling the Charging Robot in case it is offline
(no Internet and Easee App support). The touch
button may serve additional functions. Please use
the online knowledge-base for other possible touch
combinations and functions.
2. Light strip: The light strip communicates the status
of the Charging Robot at all times. Read more about this
on page 17.
3. RFID area: The integrated RFID reader enables access
control of the Charging Robot and identification of
different users. You can use it to unlock the charger
with an Easee Key. Check our knowledge base at
easee.support for more details on how to add and
manage your Easee Keys.
4. Type 2 socket: The Type 2 socket is completely
universal and allows you to charge any type of
electric vehicle using the appropriate charging cable.
Furthermore, it is possible to permanently lock the
charging cable, so you do not have to worry about it
being stolen.
Features
2
3
4
1
To Next Page
Loading...
