Need help?Do you have a question about the Easee Charge Lite and is the answer not in the manual?
General| Product Type | Electric Vehicle Charger |
|---|---|
| Charging Mode | Mode 3 |
| Connector Type | Type 2 |
| Max Charging Power | 22 kW |
| Input Voltage | 400V AC |
| Input Current | 32A |
| Output Power | 22 kW |
| Output Current | 32A |
| Protection Degree | IP54 |
| Impact Resistance | IK08 |
| Operating Temperature | -30°C to +50°C |
| Mounting | Wall-mounted |
| Weight | 1.5 kg |
| Communication | WiFi, Bluetooth |
Defines warning and caution indicators for potential hazards and safety.
Lists connectivity features like WiFi, Bluetooth, RFID/NFC, and OCPP.
Covers overload, ground fault protection, impact resistance, and insulation class.
Specifies installation network, circuit breaker, wire cross-section, and cable diameter.
Requirements for external RCDs and overcurrent protection devices.
General safety warnings and precautions for installation work.
Instructions for securely mounting the backplate to the wall.
Requirements for adding necessary external RCD protection.
Steps to create a new charging site or update an existing one via the app.
Insulation testing must be performed before attaching the Chargeberry.
Position Chargeberry into slots and press until it clicks to secure.
Detailed descriptions of light patterns and their corresponding operational statuses.
Red light indicators signifying critical errors, warnings, or incorrect wiring.
To Next Page
